Products
Downloads
Equipment selection
Contact us
About us
EN
International
EN DE RU
Ukraine
UA
United States
EN
/ Product catalogue / Fans / Inline Fans / Centrifugal / KSV

Series Vents KSV

Series Vents KSV - Centrifugal - Inline Fans
Centrifugal inline fans with forward curved blades in sound-insulated casings with filters
  • Motor type: AC
  • Impeller type: Centrifugal impeller with backward curved blades
  • Casing material: Coated steel

Air flow: up to 371 CFM

Power: from 32 W

Noise level: 0.25 Sones

Compatible with Ø 4” up to 8” round air ducts

Design

  • The casing is made of polymer coated steel, internally lined with sound-insulating layer. Power is supplied through the terminal box inside of the casing. The fan design provides convenient maintenance access to the internal parts and filter replacement.


Air filtration

  • Built-in filters provide efficient air filtration. Up to three filters can be installed into the casing.
  • MERV8 filter provides primary filtration. At the second stage, the secondary filter MERV14 or HEPA filter H13 (HEPA type C) can be installed. MERV14 filter arrests up to 98 % of PM 2.5 dust particles. HEPA Filter H13 (HEPA type C) arrest up to 99 % of PM 2.5 dust particles, pollen and bacteria. For additional removal of unwanted odours and gases, it is possible to install a carbon filter. The casing incorporates a service panel for quick access to the filters.



Motor

  • The single-speed models are equipped with a fourpole asynchronous electric external rotor motors and centrifugal impellers with forward curved blades. The impellers are dynamically balanced. The motors are compatible with power mains frequency 60 Hz. The double-speed models (Duo) are equipped with asynchronous electric external rotor motors and centrifugal impellers with forward curved blades. Double-speed control. The ball bearings enable a long operating life. The motors are equipped with an integrated overheating protection with automatic restart. The motor protection class is IP44.


Mounting

  • The fans are compatible with round air ducts. The use of flexible connectors requires fixation of the fan on the building structure by means of the supplied mounting brackets. The fan can be installed in any position (including suspended ceiling mounting), taking into account the air flow direction indicated by the arrow on the fan casing.
Datasheet
KSV (Duo) series leaflet 2025-01
549 Kb
BIM/CAD models
KSV 150 Q
1.01 Mb
BIM/CAD models
KSV 150
1.03 Mb
BIM/CAD models
KSV 100
1.01 Mb
BIM/CAD models
KSV 200
782 Kb
Image
KSV - image 1
229 Kb