Series Vents TwinFresh Elite Eco

Coming soon

Single-room heat recovery ventilation unit with ceramic heat exchanger

Filter: MERV 5 (optional MERV 8)
Motor type: EC
Control: Remote Control
Casing material: ABS Plastic
Reheater: Electric

TwinFresh Elite Eco heat recovery unit is a modern solution that combines balanced ventilation with heat recovery, an optional built-in electric heater, temperature sensor, as well as a user-friendly interface. With its compact and multi-purpose design, the device provides an effective way to improve indoor air quality without losing valuable heat (or coolness). The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building. TwinFresh Elite Eco is a decentralized unit and does not require ducting, therefore it is typically much easier to install. This makes them excellent for retrofitting in flats, apartments, hotels, houses, cottages, social and commercial indoor areas that have insufficient space to install a centralized system with ducts.

FEATURES

Simultaneously supplies and exhausts air through a single hole in the outer wall.
Separate settings for each EC fan ensure balanced ventilation.
Reducing heat losses caused by heat recovery.
Efficient ceramic heat exchanger of hexagonal cellular structure with automatic frost protection system.
Version with electric heater available.
MERV5 supply and exhausts filters (optional MERV8).
Temperature sensor.
Controlled with an Android or iOS smartphone or tablet.
House ventilation control via cloud service from anywhere in the world.

FUNCTIONS

MODES OF OPERATION

Heat recovery mode – simultaneously supplies and removes air through one opening in the outer wall with a cyclical change in the direction of air. The defrosting algorithm is activated by a triggered temperature sensor.
Ventilation mode – active operation of both fans, simultaneous supply and exhaust without changing direction.
Supply mode – active operation of both fans, simultaneously pumping air into the room. Activation of the electric heater is possible.
Exhaust mode – active operation of both fans, simultaneously removing air to the outside. Activation of the electric heater is not possible.

CERAMIC ENTHALPY HEAT EXCHANGER

The process of heat recovery takes place by regeneration with 20 to 30% moisture retention indoors, which is very important for maintenance comfortable conditions in winter.
No moisture condensation occurs in the heat recovery mode in winter.
High regeneration efficiency due to the innovative hexagonal structure of the heat exchanger cells. Recovers up to 92% of heat from exhausted air.
The cartridge, which includes the regenerator, is sealed because it is made of ABS plastic, therefore it reduces the accumulation of dirt on the heat exchanger and facilitates cleaning.
The regenerator is protected with a hydrophilic layer that prevents the penetration of moisture and the development of fungi, mold and bacteria on its surface.

UNIT OPERATING LOGIC

To increase the efficiency of the TwinFresh Elite Eco, the regenerator is divided into two parts, which are isolated from one another, thus eliminating the transfer of heat and moisture between them.
One of the fans operates in the supply mode: fresh cold intake air from outside flows through the first regenerator, and absorbs accumulated heat and humidity.
Meanwhile, the other fan operates in the exhaust mode: warm stale air is extracted from the room to the outside, and while passing through the other regenerator, it gradually heats the air up and transfers some of the moisture.
After 70 seconds operation the fans change the rotation direction and the opposite processes start.

ALL FUNCTIONS IN YOUR SMARTPHONE

TwinFresh Elite Eco combines compact size and a wide range of functions that are easy to track in a smartphone application.

AND EVEN MORE.
Just say «Hey Google...» or «Alexa...» and test, control and run TwinFresh Elite Eco in English, German, Swedish, Norwegian, Danish, Polish, Dutch, French, Spanish*.