Vents TwinFresh Expert RA1-50-2

TwinFresh Expert is the most state-of-the-art and efficient solution for a comfortable indoor climate and required air exchange in renovated premises, brand new recently inhabited houses or reconstructed apartments
  • Heat exchanger type: Regenerative
  • Filter: MERV 5 (option: MERV 14)
  • Motor type: DC
  • Enthalpy heat exchanger
Unit of measurement TwinFresh Expert RA1-50-2
Connected air duct size in 6 5/16”
Speed - 1 2 3
Phases - 1
Minimum supply voltage V 100
Maximum supply voltage V 240
Power supply frequency Hz 50/60
Rated power W 3.70 4.50 6.00
Maximum unit current A 0.04 0.06 0.09
Air flow in ventilation mode CFM 1 15 30
Air flow in heat recovery mode CFM 4 9 15
rotation speed at 50hz - 917 1490 2190
rotation speed at 60hz - 917 1490 2190
Heat recovery efficiency, max % 93
Heat exchanger type - Regenerative
Heat exchanger material - Ceramic
Filter - MERV 5 (option: MERV 14)
Ingress protection rating - IP24
Minimum wall thickness with MERV14 filter in 8 5/8”
Minimum wall thickness, in (mm) - 5 7/8”
Sound pressure level LpA at 10 ft Sones
Sound pressure level LpA at 3 ft Sones 0.3 0.3 1.3
Datasheet
TwinFresh Expert RA1-50-2 specification 2024-04
254 Kb
Datasheet
TwinFresh Expert RA1-50-2 leaflet 2024-04
7.95 Mb
Manual
TwinFresh Expert RA1-50-2 user's manuals 2024-10
9.49 Mb
Manual
TwinFresh Expert (Duo) RA1 installation guide
3.88 Mb
Certificates
ETL Certification mark for TwinFresh, Garage Kits, LD, MA and more
97 Kb
Image
TwinFresh Expert RA1-50-2 - image 1
290 Kb
Name Photo Description
Vents CO2-1 CO2-1 The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO2 concentration is an efficient energy saving solution
Vents CO2-2 CO2-2 The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO2 concentration is an efficient energy saving solution
Vents HR-S HR-S The humidistat is designed for controlling humidification and/or dehumidification in ventilation, air conditioning and heating systems. Can also be used to alarm when the humidity exceeds or falls below a pre-set level
Vents P3-1-300 P3-1-300 Created to optimize both product performance and homeowner comfort. Offers simplified control for ease of use
Vents AC208EM2+LP AC208EM2+LP Created to optimize both product performance and homeowner comfort. Offers simplified sensor control for ease of use. Equipped with a temperature indicator
Vents A50 A50 An electronic wall control timer that is compatible with all Frigate HRV/ERV models