Series Vents PSS 102

The wall vent is an air handling unit designed for creation of a continuous air exchange and supply of fresh air to residential and non-residential premises
  • Motor type: AC
The wall vent is an air handling unit designed for creation of a continuous air exchange and supply of fresh air to residential and non-residential premises. PSS is a cost-efficient and autonomous device for more intensive air exchange as compared to passive airing. The vent PSS allows bringing fresh air inside without opening the windows and thus without letting the dust, street noise and plant pollen enter the room. Specially developed design of inner grille, as well as the device for controlling the open cross-section of the inflow, provide for a steady inflow and uniform distribution of fresh air in the room. The vent is installed on the sunny side of the outer wall of an apartment, cottage, office building, etc.

Features

  1. Suitable for air handling of small and middle-size premises (depending on the way of installation of the fan). The air flow direction can be easily changed by turning the motor 180 degrees;
  2. The solar panel provides for a more intensive air exchange as compared to regular passive airing;
  3. Cost efficiency: the natural solar power is used;
  4. Independence: The motor is powered by solar panel. Supply voltage of the motor is 9…18 V. Electric parameters of the solar panel change depending on intensity of the solar flux. Intermediary parameters are shown in the table below;
  5. In dark hours of the day, the ventilator operates as an element of passive ventilation;
  6. Possibility to manually control the cross-section of the air flow.


Design

  • Wall vent consists of two ventilation grills (inside and external) and a telescopic air duct.
  • The inner grill is produced from high-quality ABS plastic and is equipped with a dust filter. Inside the grille, a small motor is installed for intake or exhaust of air. The direction of air flow can be easily reversed by turning the motor 180°. The built-in control device allows to vary the volume of the inflowing air or to fully close the ventilation channel.
  • The length of the telescopic PVC air duct can be adjusted.
  • The external grill (ventilation cowl) is produced from high-quality ABS plastic.
  • The solar panel which supplies power to the motor is mounted on the ventilation cap’s surface.

Air flow distribution

  • The design of the inner grill, as well as the device for controlling the open cross-section of the air flow, provide for a steady inflow and uniform distribution of fresh air in the room. Depending on the desirable inflow rate, you can smoothly control the intensity of air inflow.


  • The inner grill is produced from high-quality ABS plastic and is equipped with a dust filter (MERV6v class). Inside the grille, a small motor is installed for intake or exhaust of air. The direction of air flow can be easily reversed by turning the motor 180°. The built-in control device allows to vary the volume of the inflowing air or to fully close the ventilation channel.
  • The length of the telescopic PVC air duct can be adjusted.
  • The external grill (ventilation cowl) is produced from high-quality ABS plastic. The solar panel which supplies power to the motor is mounted on the ventilation cap’s surface.
Installation


Lineup Vents PSS 102
Datasheet
PSS 102 leaflet 2023-07
484 Kb
Datasheet
PSS 102 specification 2023-07
223 Kb
Manual
PSS 102 installation guide
2.18 Mb
Image
PSS 102 - image 1
347 Kb